8 Blocks Is How Many Miles (2024)

FAQs

8 Blocks Is How Many Miles? ›

In Chicago, a typical city block is 330 by 660 feet (100 m × 200 m), meaning that 16 east-west blocks or 8 north-south blocks measure one mile, which has been adopted by other US cities.

So How Many NYC Blocks Are in a Mile? The average length of a north-south block in Manhattan runs approximately 264 feet, which means there are about 20 blocks per mile.

In some cities, especially in the United States, the standard city block is approximately 1/20th to 1/10th of a mile, which means there are between 10 and 20 blocks in a mile.

Eight Chicago blocks = one MILE

In the example we just cited, we know with confidence that Belmont St. (3200 N) is 8 blocks = 1 mile north of Fullerton (2400 N)... assuming the same east/west location, of course.

10 blocks (0.5 mile) takes about 10 minutes to walk. Most people walk about 3 miles per hour or 1 block per minute. Walking between avenues takes about 3 minutes. Designate one day a week to a walking commute.

Oblong blocks range considerably in width and length. The standard block in Manhattan is about 264 by 900 feet (80 m × 274 m). In Chicago, a typical city block is 330 by 660 feet (100 m × 200 m), meaning that 16 east-west blocks or 8 north-south blocks measure one mile, which has been adopted by other US cities.

North-south is easy: about 20 blocks to a mile. The annual Fifth Avenue Mile, for example, is a race from 80th to 60th Street. The distance between avenues is more complicated. In general, one long block between the avenues equals three short blocks, but the distance varies, with some avenues as far apart as 920 feet.

Ten blocks is typically a mile to a mile and a quarter, but obviously it differs by city and makes no sense for cities that are not laid out on a planned grid system.

20 blocks equals 1 mile, or rather 1/20 of a mile equals 1 block. However NYC blocks are not true units of measurements. … for instance blocks running west to east are 2 to three times longer than the blocks running south to north.

City blocks vary, and are usually not square, so a good guess is about 100–200 yards/meters per block, depending on which direction they are coming, so a VERY rough answer is they are likely within a quarter mile, or less than 400 meters away.

How many miles is 4 blocks? ›

4 true blocks should = 4/10 of a mile.

On average, expect anywhere from 650 feet to 920 feet between avenues, translating to a much looser 7 blocks per mile.

However, today, we use 100,000 sq feet as a standard city block. Engineers use this size for uniformity when making calculation estimates, which is about 17 blocks per mile or 2 1/4 acres. So that would be 8.5 city blocks per half mile.

However, if someone walks 20-30 mintues, that is considered 1 mile. Walking 20 blocks would not definitely take 20-30 minutes.

There is no standard measurement for a city block. City blocks come in all different sizes, but as a general rule, in the United States, many city blocks are from 1/6 to 1/8 of a mile. In Manhattan, New York, 20 blocks equals one mile.

We all know walking is good for your health. Research shows that even walking 10 city blocks a day, equivalent to about 2,000 – 3,000 steps or 1 km, can help delay dementia and may help improve cardiovascular and joint health over time.

On the Manhattan grid (i.e., generally above 4th St.), the rule of thumb is that 20 short blocks equal a mile. "Short blocks" are along avenues, going roughly north-south, from one (numbered) street to the next. A "long block" (along streets, between avenues, east-west) is about three short blocks.

However, if someone walks 20-30 mintues, that is considered 1 mile. Walking 20 blocks would not definitely take 20-30 minutes.